GREEN MANELISHI PRODUCTS

Contact via e-mail or write to: GM/RMS, P.O. Box 251, Kittery, ME 03904

BUCKLES


BRYDEN SPORT BUCKLE	BRYDEN TECH BUCKLE	ROBSON BUCKLE

Green Manelishi buckles are an Innovative, Practical and Versatile hybrid of buckle and d-ring that dramatically increase gear management solutions for sport and technical divers.

There are currently two models: a Bryden and a Robson. Either will "lock down" on 2" webbing that is threaded between the latch and body; this makes them ideal for technical divers using a backplate or backpack who want an easily adjusted, secure d-ring on the non-buckle side of their waist strap.

The Bryden buckle is available in two versions: "Sport" or "Technical". Both versions incorporate a pivoting d-ring.

The Bryden Sport buckle incorporates a small accessory ring that is pushed out of the way, by the latch, when the buckle is opened.

The Bryden Tech buckle has a large accessory loop that will not be contacted by the latch.

The Robson buckle has a high-profile, fixed-position accessory loop. It can be opened for re-positioning, even with gear clipped to the accessory loop, HOWEVER The Robson buckle has no quick release capability, and was NOT designed, nor should it be used, as the primary buckle on a weight belt, harness, BC, etc.

BRYDEN SPORT BUCKLE

The Bryden "Sport" Buckle (patent pending) incorporates a low profile, pivoting accessory ring that allows the buckle to be quick released so it can be used as the primary buckle on a weightbelt, backplate or old-style backpack. If your conventional BC has 2" webbing the stainless steel Bryden can replace the plastic fastex buckle and provide you with a handy d-ring. I use a Bryden on my DUI W&T harness. On a backplate/backpack harness it can also be used to retain a small canister light or waist pocket. If you don't own, or use, a canister light or pocket, just use it by itself as a semi-permanent,easily adjusted d-ring on the waist strap. Depending on the diameter of the light canister, the pivoting ring on the Bryden "Sport" buckle might nest very deeply between the canister and waist strap, thus presenting a challenge to access. For retaining a canister light, etc. we suggest using either the Bryden "Tech" or Robson buckle.


BRYDEN SPORT TOP	BRYDEN SPORT PROFILE

BRYDEN SPORT SUPPORTING 50lb. BELT


BRYDEN SPORT ON BP HARNESS	BRYDEN SPORT ON DUI W&T	BRYDEN SPORT ON BC


BRYDEN SPORT FRONT WITH WEBBING	BRYDEN SPORT REAR WITH WEBBING


BRYDEN SPORT WITH SMALL CAN LIGHT	BRYDEN SPORT ALONE	BRYDEN SPORT WITH SMALL POCKET

BRYDEN TECH BUCKLE

The Bryden "Tech" Buckle (patent pending) incorporates a high profile, pivoting accessory ring that can easily be manually pushed out of the way so the buckle latch can be opened to facilitate repositioning the buckle, or removing it completely from the harness. Below are a few pictures suggesting how the Bryden "Tech" buckle can be used.


BRYDEN TECH TOP	BRYDEN TECH PROFILE

BRYDEN TECH THREADED


BRYDEN TECH ON BP HARNESS	BRYDEN TECH ON HARNESS W/ REEL	BRYDEN TECH ON HARNESS W/ POCKET


BRYDEN ON HARNESS W/ LIGHT-SAVER	BRYDEN ON HARNESS W/ LIGHT-SAVER AND REEL
NOTE D-RING LYING FLAT	NOTE D-RING HAS BEEN PIVOTED BACK, EXPOSING LATCH

ROBSON BUCKLE

The Robson Buckle (patent pending) was designed for backplate and old-style backpack divers to use on the non-buckle side of their harness, most typically to retain a canister light but it can also be used by itself, to provide an easily accessible, stable and adjustable location for clipping a reel, strobe light, etc. NOTE: The Robson Buckle can be opened with gear clipped to the accessory loop but is NOT intended to be utilized as a primary, emergency release buckle.


ROBSON TOP	ROBSON PROFILE


FRONT WITH WEBBING	REAR WITH WEBBING


ROBSON ALONE	ROBSON WITH LARGE CAN LIGHT

ORDERING BUCKLES

These buckles are constructed of stainless steel components so they are robust and corrosion resistant. The buckles have a 30 day money back guarantee; if you are not satisfied, return it along with a note explaining what you do not like (constructive criticism will enable me to improve the design) and your purchase price will be refunded. If you are satisfied, please tell others; satisfied customers are the best advertising. There is also a limited lifetime warranty; if through normal use it is damaged, return it for replacement. GM/RMS reserves the right to determine if the buckle appears to have been deliberately damaged or subjected to unreasonable mechanical stress. PLEASE CONTACT US FOR RETURN AUTHORIZATION.

Buckles (all models) can be ordered from GM/RMS for the following prices:

The Bryden "Sport" Buckle is $20.00 plus cost of packaging/shipping.

The Bryden "Tech" Buckle is $22.00 plus cost of packaging/shipping.

The Robson Buckle is $25.00 plus cost of packaging/shipping.

Volume discounts are available.

Payment is by check, money order or PayPal (via e-mail billing).

To order, send an e-mail and inform us:

shipping address

which buckle(s) and how many

Preferred shipping method: FedEx, UPS, USPS, Priority, First Class, etc.

We will respond with the total cost and other pertinent information.

If you have any questions, send an e-mail to GM/RMS

Green Manelishi "Bryden Sport" buckles are also available at the following locations:

Atlantic Aquasport in Rye, NH

Aquadiving Academy in Portland, ME

Tech Diving Limited in Lake Havasu, AZ

Goto Top-of-page

MISCELLANEOUS

Posters, mouse pads, shirts

The poster is an 8" (w) x 12" (h) image printed on 17" (h) x 11" (w) glossy stock.
Mousepads are 1/8 or 1/4 inch thickness and 8" x 9".
- The GM mousepad is portrait orientation
- the flag mouse pad is landscape orientation.
Shirts are heavy duty (pre-shrunk) white, cotton T-shirts and the image is actually green, not black as depicted.

GM COLOR POSTER

GM MOUSE PAD

FLAG AND CROSS MOUSE PAD

GM SHIRT FRONT

GM SHIRT BACK

For up-to-date pricing for the poster, etc. send an e-mail to us.

Goto Top-of-page